0099001002-01Portable Power 1150OPERATOR’S MANUALModel No. 28.71988Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.Read and foll
• 9 •Powering a 120V AC Device8.11 To operate a 120V AC device:Ensure that the battery clips are securely on the storage holders.1. Open the protectiv
• 10 •IMPORTANT:10.5 CHARGE IMMEDIATELY AFTER PURCHASE• KEEP FULLY CHARGED• Charge the jump starter internal battery immediately after purchase, after
• 11 •SPECIFICATIONS12. Internal Battery Type Maintenance-free AGM Lead-acidNominal Voltage 12V DCCapacity 22 AhDC Power Outlet (Max. Continuous Load)
• 1 •IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.SAVE THESE INSTRUCTIONS – Charge the jump starter internal battery immediately after
• 2 •Do not put ngers or hands into any of the 1.4 jump starter’s outlets.Do not expose the 1.5 jump starter to rain or snow.To reduce the risk of
• 3 •Clean the battery terminals before using the jump starter. During cleaning, keep airborne 2.15 corrosion from coming into contact with your eyes,
• 4 •ASSEMBLY INSTRUCTIONS5. Remove all cord wraps and uncoil the cables prior to using the jump starter. FEATURES6. Jump Start On/Off switch 1. Inver
• 5 •The charger will automatically go into maintain mode and maintain the battery at full 4. charge without damaging it.Charge the jump starter as so
• 6 •The DC power outlet is wired directly to the internal battery. Extended operation of a 12V DC device may result in excessive battery drain. Recha
• 7 •NOTE: To prevent overheating, the compressor has built-in thermal protection that will turn the compressor off before it overheats. If the compre
• 8 •Keep the jump starter dry.3. DO NOT allow the jump starter to come into contact with rain or moisture.4. DO NOT operate the jump starter if you,
Commentaires sur ces manuels