Sears 486.24536 Manuel d'utilisateur télécharger pdf (Page 4)

FIGURE 2B

CARTON CONTENTS

1. Sleeve Hitch Frame Assembly

2. Right Mounting Bracket

3. Left Mounting Bracket

4. Lifting Link Plate

5. Hitch Pin

6. Lift Lever Assembly (with Right Pivot Bracket)

7. Left Pivot Bracket

8. Sleeve Hitch Lift Assembly

ASSEMBLY

ORIGINAL NUT

LEFT MOUNTING

BRACKET

3/8" FLAT WASHER

(TOP HOLE ONLY)

REMOVE NUTS

FROM BOLTS

RIGHT MOUNTING

BRACKET

3/8" LOCK WASHER

(If new bolt and nut are needed)

FIGURE 1

TOOLS REQUIRED FOR ASSEMBLY

(1) 1/2" Wrench or Adjustable Wrench

(2) 9/16" Wrenches or Adjustable Wrenches

(1) 15/16" Wrenches or Adjustable Wrenches

• Assemble a 5/16" x 1" hex bolt, a spacer and a 5/16"

nylock nut to the three position slot in the Right Pivot

Bracket on the Lift Lever Assembly. Use the position

closest to the bend in the bracket (gives lowest

implement depth setting). See ﬁ gure 1.

5/16" X 1"

HEX BOLT

5/16" NYLOCK

NUT

SPACER

PIVOT

BRACKET

FIGURE 2A

3/8" HEX NUT

3/8" LOCK WASHER

LEFT MOUNTING BRACKET

3/8" x 1-1/4"

HEX BOLT

RIGHT MOUNTING BRACKET

IF YOUR TRACTOR LOOKS LIKE FIGURE 2B

• Remove the nuts from the two bolts shown in each

side of the tractor, leaving the bolts in place.

• Attach the Left Mounting Bracket (pin at top facing

in) to the bolts using the original nuts and a 3/8" ﬂ at

washer. Repeat for the other side.

NOTE:

If no bolt and nut are present in a hole, use a

3/8" x 1-1/4" hex bolt, 3/8" lock washer and 3/8" hex nut to

attach the Mounting Bracket to the hole.

IF YOUR TRACTOR LOOKS LIKE FIGURE 2A

• Install two 3/8" x 1-1/4" hex bolts in the left side of the

tractor as shown. Attach the Left Mounting Bracket

(pin at top facing in) to the bolts using two 3/8" lock

washers and 3/8" hex nuts. Repeat on the right side.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Sears 486.24536 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Outils de jardin Sears 486.24536