Sears 26462_0 Manuel d'utilisateur

SEMmOWNERSMANUALModel No. 264620CRAFTSMANPROFESSIONAL MID-SIZED ROUTER TABLE®WARNING:Before operating product, read this manual and follow all its Saf

AwarningThe vibrations from operating the router can, from time to time, cause the hex nut and the clamp plate to become loose on the clamp rod. PERIO

surface before use. Failure to do so could cause the router table to tip over or slide, resulting in property damage and/or serious personal injury.1.

OPERATIONGENERALThe power switch box is designed to be used with most Craftsman router tables. It provides the convenience of an “ON-OFF” switch box

The switch box incorporates two positive features to prevent inadvertent switching on of the router and the unauthorized, and possibly hazardous, use

The fence on your router table is provided as a guide to hold the work piece for accuracy in routing.USING THE ROUTER TABLEFIGURE 25AwarningBEFORE eac

section ADJUSTING DEPTH AND HEIGHT OF THE CUT. Tightly secure the fence assembly and the router as described before. (MAKE SURE ROUTER IS UNPLUGGED WH

FIGURE 29NOTEOverhead guard shown raised for reasons of clarity. FIGURE 30NOTETest cut a scrap piece of woodWhen routing deep cuts (controlled by the

Cutting Tenons1. Make certain that the adjustable fence is lockedin position with its face flush with the front face of the fence.2. Mount the push bl

NOTEWhen cutting tenons, always clamp the work piece with the end to be cut resting flat on the table top. This will minimize steps in the finished te

PARTS LISTPARTS LIST FOR CRAFTSMAN PROFESSIONAL MID-SIZED ROUTER TABLEMODEL NO. 26462KEYPART NO.DESCRIPTIONQTY KEYPART NO.DESCRIPTIONQTY~310"-11I

TABLE OF CONTENTSGeneral Safety Instructions for Power Tools...3Additional Safety Instructions for Router

TABLE ASSEMBLY

SWITCH ASSEMBLY21

When corresponding, always give the following information as shown in the list:Printed in U.S.A. 12/0049LCN-841. The PART NUMBER2. The PART DESCRIPTI

SAFETY GUIDELINES - DEFINITIONSThis manual contains information that is important for you to know and understand. This information relates to protect

18. Use recommended accessoriesConsult the owner’s manual for recommended accessories and follow the instructions. The use of improper accessories may

switch box when turning the router ON or OFF. DO NOT touch anything but the switch box when doing this. NEVER reach under the router table for any rea

ASSEMBLYTOOLS REQUIRED• Phillips screwdriver.• Small or medium sized adjustable wrench (or a set of nutdrivers).• Electrical with 5/32" drill bit

FIGURE 5FIGURE 7MOUNTING ROUTER TO THE ROUTER TABLEAwarningALWAYS UNPLUG ROUTERBEFORE MOUNTING.Craftsman Routers with Three-Hole and 6"Diameter B

other Brands of RoutersIt will be necessary for you to purchase a Craftsman Professional Router Adapter Plate, #25333, from your local Sears Retail Ou

4. Repeat steps 1 through 3 for the other side of the fence.5. Make sure the adjustable jointing fence is inside the router table fence as far as it w